Updating the software
Close
Updating the software
最高固件版本为3.5rX的设备
如果从4.0r0固件之前版本（如3.5rx）升级，升级到4.3r0p1之前请遵循以下步骤。
重要提示：
首先升级到3.5r7固件，确保产品配置和数据库为最新（先进行配置备份）。
• 针对多路扬声器，请使用“Dirac设置”将通道分组到扬声器中。
• 取消超低音扬声器和其他扬声器分组。
• 升级到4.1r2版本
固件版本低于4.1r2的设备
如果设备搭载4.1r2之前的固件版本，则必须首先使用客户端门户中提供的4.1r2固件包进行升级。只有当设备升级为4.1r2固件版本之后，您才能进行下一步，升级至4.3r0p1固件版本。
RELEASE NOTE
CHANGES FROM 4.3R0 TO 4.3R0P1 :
•TCP/API (interface Savant).
• Fix an issue related to connection.
• Fix an issue related to inputs list command.
• EQs:
• Fix an issue related to REW import.
• Fix an issue related to enable/disable EQ.
• Remote IR
• Fix an issue related to reboot when IR remote control buttons are pressed too quickly
安装更新前的重要建议：
• 请确保为您的ISP / I.ISP配置做好备份。请查看更新后的《安装指南》或《用户手册》，了解有关备份配置的更多信息。
• 如需从早于V4.0r0版本的固件，例如3.5rx，进行升级，请在升级到V4.1r2前按照以下步骤来操作。
• 先升级到3.5r7版本的固件，确保产品配置和数据库是最新的（先为配置做好备份）
• 对于多路扬声器，请使用“Dirac设置”将频道分组整合到扬声器中。
• 取消低音炮与其他扬声器的组合。
• 升级到4.1r2
• 4.1R2 升级
• 软件版本：2021年5月31日
• 软件大小：80 Mo
发布说明
从4.1R1到4.1R2的变化：
优化音响净空，在配置时无需后处理（旁路模式），让系统的动态范围最大化。
•在所有频道中添加FIR滤波器，提高44.1khz采样率的高频抑制。
•解决编辑低音管理时保存错误交叉参数的问题。
•解决删除配置文件的问题：它还将删除调用此配置文件的预设。
•解决ROON拒绝开始回放的问题：“设备拒绝切换输入”。
•解决休息时触发的问题。
•解决“DTS模拟补偿”的问题。一些老旧播放器或计算机缺少使用DTS:X内容报告的模拟补偿通知。
•解决配置程序中的剧院名称的问题（多个低音炮）。
•解决DIGOUT和剧院备用的问题（仅限MK1）。
•解决AVB OUT板上的主音量控制问题。
•解决TCP/API的潜在崩溃问题（专家界面）
•解决AES 在语境帮助中的问题。
4.1R2新特色和增强
系统和控制：
•在Height播放器中对中心前方高度频道的支持（现有多达452种扬声器配置）
IMPORTANT RECOMMENDATIONS BEFORE INSTALLING THIS UPDATE:
• Make sure you back up the system before installing this update.
• If upgrading from an earlier version than V4.0r0 firmware such as 3.5rx, please follow below steps prior to upgrading to V4.1r1.
• Start first with an upgrade to 3.5r7 firmware to ensure product configuration and database is up to date (make a configuration backup first.
• For multiway speakers, use the “Dirac setup” to group channels into speaker.
• Ungroup subwoofers and other speakers.
• Upgrade to 4.1r1
• 4.1R1 update
• Software version: 31 March 2021
• Software size: 294 MB
RELEASE NOTE
SYSTEM & CONTROL :
• Common to all ISP/I.ISP
• Flexible Bass Management: It’s now possible to configure up to 6 bass zones.
WARNING : it is not possible to control volume on a Digital Output configured in Analog mode.
HDMI : 7+2 eARC board:
• eARC / ARC compatibility has been improved (more screens tested).
• EDID and eARC capabilities files are now included in logs package.<
• Better mute handling on stream change.
The upgrade process can be done either via the Web User Interface (banner on the top of the page, green at the beginning and red during the upgrade) or via the Front Panel display of the product. Different steps will have to be followed. Do not interrupt the process before reading the message: “Update finished successfully, restart your unit”.
RELEASE NOTE
New features and enhancements
SYSTEM & CONTROL:
HDMI : HMC82 (7+2 eARC)
The upgrade process can be done either via the Web User Interface (banner on the top of the page, green at the beginning and red during the upgrade) or via the Front Panel display of the product. Different steps will have to be followed. Do not interrupt the process before reading the message: “Update finished successfully, restart your unit”.
RELEASE NOTE
New features and enhancements
SYSTEM & CONTROL:
WebUI
• Copy to EQ : fix crossover copy issue with EDGE browser
TCP/API
• Zone volume up and down commands added
HDMI :
HSR82P
• Fix audio stream detection issue
The upgrade process can be done either via the Web User Interface (banner on the top of the page, green at the beginning and red during the upgrade) or via the Front Panel display of the product. Different steps will have to be followed. Do not interrupt the process before reading the message: “Update finished successfully, restart your unit”.
RELEASE NOTE
New features and enhancements
SYSTEM & CONTROL:
WebUI
• EQ creation and visualisation
Filter frequency response view.
Combined filters frequency response view.
EQ bank per channel has been increased from 10 to 20.
• Zone2
OPTICAL (PCM only) / COAX (PCM only) / Stereo Analog input can be used has Zone2 audio in.
Zone2 audio is displayed in VuMeter.
• External generator is available for HDMI / OPTICAL / COAX / Stereo Analog.
• Deep/Standby Network is configurable.
• Download logs include SQL configuration (only for support).
• Monitoring unit “sleep” status event added.
• Input, audio in "eARC" has been replace by "ARC/eARC".
Dirac Live DLCT 2.x
• Management of Dolby Enabled Speakers.
Room EQ Wizard
• EQ Filters can be exported from REW, then imported to ISP.
TCP/API
• Zone2 control command added.
• “Proc state” improvement.
HDMI :
HSR72-Q new software
• Hot Plug Event and authentication improvement.
• AppleTV improvement.
• AppleTV switching to Oppo UDP203 improvement.
New HMC82 board control
• ARC and eARC compatible.
• Dolby Vision, Standard and Low Latency pass through.
Removed features
SYSTEM & CONTROL:
WebUI
• Loudness and CinemaEQ
User Manual
FOCAL 的产品聚焦于此项科技
